Trilithic

75 Ohm Relay Switches

75 Ohm Relay Switches View larger Image

75 Ohm Relay Switches

Trilithic manufactures 50 and 75 ohm, SPDT, SP4T, and SP8T RF Switches.

The SPDT RF Switches include latching and non-latching electronically controlled switches, covering the range of DC to 1,000 MHz, are available in a variety of configurations including a direct PCB-mountable version. The A and B ports are internally terminated when not connected to the common port. Control options include non-latching CMOS, latching and non-latching TTL, as well as direct drive. Switching time is 10 milliseconds and the rated life is over 1 million actuations. When non-latching relays are used, there is no ambiguity as to the switch state after a power failure, common is connected to port A.

The SP4T and SP8T Switches are controlled via nine conductor D-Subminiature connectors with hard-wired internal logic. A single line controls each switched port connection to the common port. TTL and CMOS compatible drivers are available. Switching time is 10 milliseconds and the rated life is over 1 million actuations. When non-latching relays are used, there is no ambiguity as to the switch state after a power failure, common is connected to port 1.

Specifications

Model 7002 7204 7208
Frequency Range
DC to 1 GHz with Precision F Type Connector
DC to 1 GHz with Precision F Type Connector
DC to 1 GHz with Precision F Type Connector
Impedance
75 Ohms
75 Ohms
75 Ohms
Insertion Loss
0.25 dB max.
DC to 500 MHz, 0.3 dB
500 MHz to 1GHz, 0.5 dB
DC to 500 MHz, 0.5 dB
500 MHz to 1GHz, 1.1 dB
Isolation
DC to 500 MHz, 60 dB min.
500 MHz to 1 GHz, 50 dB min.
DC to 500 MHz, 60 dB min.
500 MHz to 1 GHz, 50 dB min.
DC to 500 MHz, 60 dB min.
500 MHz to 1 GHz, 50 dB min.
VSWR
1.22:1 (20 dB R.L.) min
(any port, connected port terminated)
DC to 500 MHz, 1.25:1 (19 dB R.L.)
500 MHz to 1GHz, 1.3:1 (17.7 dB R.L.)
DC to 500 MHz, 1.25:1 (19 dB R.L.)
500 MHz to 1GHz, 1.3:1 (17.7 dB R.L.)
Input Power
0.5 Watts
0.5 Watts
0.5 Watts
Switching Time
15 Milliseconds
15 Milliseconds
15 Milliseconds
Switch Life
106 actuation cycles
106 actuation cycles
106 actuation cycles
Operating Voltage
5V, 12V and 24V standard
5V, 12V and 24V standard
5V, 12V and 24V standard
Switch Power Consumption
400 mW, failsafe; 2 mW latching driver
800 mW
1.2 Watts
Temperature
-20° to +60°C
-20° to +60°C
-20° to +60°C
Control Options
CMOS (non-latching)
TTL (failsafe and latching)
CMOS (failsafe)
TTL (failsafe)
CMOS (failsafe)
TTL (failsafe)
Weight
2 ounces
3 ounces
8 ounces
Connectors
BNC and Precision F
BNC and Precision F
BNC and Precision F
Think Ahead.
Copyright © 2010 Trilithic, Inc. All Rights Reserved
Execution time: 0.13 seconds
Close

Translate Page

  • To translate page from English to another language, select a language from the drop-down list.
  • To return the page to English, click the Show Original button in the Google Translate bar at the top of the page.
  • To close Google Translate, click the X in the Google Translate bar at the top of the page. This also changes the page back to English.
  • To close this dialogue, click the Close button.
Notice: Translations are approximate.
Close

Session Alert

Notice: Your session is about to expire. If you would like to continue, please click the Continue button. Otherwise you will be logged out and must log back in to return to the current page.

Sign In

My email address is *
* You may also enter your Trilithic screen name.